Clausing Manual Surface Grinder: 24" Table Length, 12" Table Width, 3 Phase, 1,750 RPM, 230 & 460V-5 hp, 3" Arbor Hole Dia, 12" Wheel Dia, 1-1/4" Wheel Width
Brand Name:
Clausing
MFR Code::
CSG1224ASDIII
| Arbor Hole Diameter (Decimal Inch) | : | 3.0000 |
| Arbor Hole Diameter | : | 3 in; 76.2 mm |
| Arbor Hole Diameter (Inch) | : | 3 |
| Arbor Hole Diameter (mm) | : | 76.20 |
| Operation Type | : | Automatic |
| Machine Type | : | Floor |
| Spindle Speed | : | 1750.0 |
| Table Length | : | 609.6 mm; 24 in |
| Wheel Diameter (Inch) | : | 12 |
| Table Width | : | 304.8 mm; 12 in |
| Wheel Diameter | : | 304.8 mm; 12 in |
| Wheel Width (Decimal Inch) | : | 1.2500 |
| Wheel Width (Inch) | : | 1-1/4 |
| Wheel Width | : | 31.75 mm; 1.25 in |
| Table Speed | : | 196.8500 to 984.2520 in/min; 5.00 to 25.00 m/min |
| Phase | : | Three |
| Maximum Cross Grinding Width (Decimal Inch) | : | 11.8110 |
| Maximum Cross Grinding Width (mm) | : | 300.00 |
| Maximum Longitudinal Grinding Length (Inch) | : | 23-5/8 |
| Hydraulic Motor Horsepower (HP) | : | 2.00 |
| Maximum Automatic Crossfeed Transverse Travel | : | 310.0 mm; 12.2047 in |
| Maximum Cross Grinding Width | : | 11.811 in; 300.0 mm |
| Maximum Spindle Centerline To Table Distance | : | 23 in; 584.2 mm |
| Maximum Spindle Centerline to Table Distance (mm) | : | 584.20 |
| Maximum Longitudinal Table Travel | : | 25.5906 in; 28.74 in; 650.0 mm; 730.0 mm |
| Maximum Longitudinal Grinding Length | : | 600.08 mm; 23.625 in |
| Feed Per Graduation Of Handwheel | : | 0.0008 in |
| Maximum Manual Crossfeed Transverse Travel | : | 340.11 mm; 13.39 in |
| UNSPSC Code | : | 23241402 |
| Feed Per Revolution Of Handwheel | : | 0.1969 in |
| Feed Rate Per Graduation Of Handwheel | : | 0.02 mm |
| Feed Rate Per Revolution Of Handwheel | : | 5.0 mm |
| Voltage | : | 230/460 V |
| Overall Length | : | 2700.0 mm; 106.299 in |
| Vertical Downfeed Rapid Travel | : | 6 |
| Max. Longitudinal Grinding Length (Decimal Inch) | : | 23.6250 |
| Vertical Downfeed Slow Travel | : | 0.2362 |
| Vertical Downfeed Step Feed | : | 0.00004 in; 0.001 mm |
| Max. Spindle Center to Table Dist. (Decimal Inch) | : | 23.0000 |
| Max. Hydraulic Long. Table Travel (Decimal Inch) | : | 25.5906 |
| Max. Manual Cross Transverse Travel (Decimal Inch) | : | 13.390000 |
| Feed Per Revolution of Handwheel (Decimal Inch) | : | 0.1969 |
| Feed Rate Per Revolution of Handwheel (mm) | : | 5.00 |
| Feed Per Graduation of Handwheel (Decimal Inch) | : | 0.0008 |
| Feed Rate Per Graduation of Handwheel (mm) | : | 0.02 |